Which bulb size does my car need?

Your best bet to determine this is to look at this site:

Hid Conversion Kit Compliance List (Click here)

Detailed Photos on Hid Conversion Kits

Here are some detailed pictures of the Hid Conversion Kit (8000K) that we installed on a car. This is the bixenon version with both low beam and high beams functioning.

CLICK HERE TO VIEW PICTURES OF HID AND INSTALLATION PROCESS

Technical Details

The features of xenon metal halide lamp for vehicles

Ballast technical parameters

Hid Conversion Kit Technical Parameters

This compares and contrasts halogen lamps to the xenon lamps that we sell.

Installation Procedure

1. Wait for the engine to cool down completely then install HID lighting system. Remove the joint, back cover to lamp lanterns and original halogen lamp from the car lanterns.
2. Take out the new HID lighting system from packing box, check every piece of the system carefully, then install the lamps on the bases in the headlight lanterns.
3. Make sure the HID lamps are fixed in good condition in the lanterns, it must prevent the deformation of HID lamp.
4. Drill a hole on the back cover of head lamp lanterns, the hole size is around 25mm just fit with waterproof ring which is used as wire feed through. 。
5. Connect the input terminal (12V DC) of the ballast to the power supply terminal of headlamp lanterns, and connect the output terminal of the ballast with the connector of the lamp.
6. Check all the installation procedures, make sure that the connection of electricity polar is correct, then start the engine of vehicle, then turn on the lamp.
7. Check the profile, height and distance of photo beam and adjust them to meet with the requirements of traffic regulations. 

Installation Notice

1.HID vehicle lamp system generates a high voltage pulse of 23KV to ignite the lamp during start up. Remember to cut off the input power when installing or detaching the lighting systems. Before installation, check the ballasts, lamps, wires, plugs and all other parts carefully. If any damage is found, stop the installation immediately.
2. When installing this product, the relay unit which is specially designed for CNLIGHT lighting system, is recommended to use for safe operation.
3. Never touch the lamp with your finger, otherwise you may damagel the lamp and shorten the lifetime of the lamp.
4. HID lamps emit strong white light, do not look at it directly after starting it.
5. After the engine of the car is stopped and cools down completely, install or remove the HID lighting system to avoid personal injury by high temperature.
6. Periodically clean the lamp to maintain the brightness and clarity of the lamp.

General Information

H1 / H7

The H1 conversion kit is paired with our H7 model conversion kit for a complete package for your car. H1 is the high beam lights kit and H7 is the low beam lights kit. The table below explains the compliance of our hid conversion units with cars by make, model, and year. Please be sure to check the information carefully to be sure that you choose the correct hid kit if there is any confusion you can always contact our knowledgeable and friendly staff and they would be willing to answer any questions you may have.

As you may or may not know hid conversion kits vary a lot based on the make and model of your car. Also, certain cars need 2 different hid kits for low beam verses high beam lights. We have put together a detailed list of what cars are compliant with the H1 model hid conversion kit and linked you to the other kits based on models of cars. If you notice that your car needs 2 separate kits you can click on the link for the other kit inside the table and purchase the 2 kits together if you wish. Or at least you can use this information to help you shop for hid kits for your specific make, model, and year of car.

Automobile Compliance List for H1/H7 Hid Conversion Kits

The following is not a complete list. It includes a lot of common cars that the H1/H7 conversion kits are purchased for.